Electric screw press (J58K)
Electric screw press is a kind of forging equipment with strong technological applicability, taking into account the dual properties of forging hammer and press, and has the characteristics of simple structure, small size, short transmission chain, convenient operation, safe operation and small maintenance workload. It is suitable for various processes such as precision forging, finishing, precision pressing, embossing, calibration, and leveling.
J58K series electric screw press adopts advanced frequency conversion control technology, the structure is simple and reliable, and can provide large working energy. The motor drives the slider to move up and down through the pinion gear, the large gear and the screw. The role of flywheel energy storage. After the start signal is input, the motor drives the slide block to accelerate down through the pinion gear and the big gear from a static state. When the motor reaches the speed required by the preset striking energy, the motor stops accelerating, and the kinetic energy stored by the large gear works to make the part shape. . At the same time, the motor immediately drives the large gear to reverse, and after returning to a certain angle, the motor enters the braking state, so that the large gear drives the slider back to the preset position. Since the sliding block is braked by the motor during the return stroke, the mechanical brake only works when the sliding block is close to the top dead center, and the braking material is not easy to wear and does not need to be replaced frequently.If you are interested in it, pls contact me. Luca firstname.lastname@example.org WhatsApp/WeChat: +86-16692292860