630Ton Finishing Electric Screw Press/Hot Die Forging Press for sale price in China
Buying electric screw press selection points:
1. The nominal pressure of the press should be greater than the total pressure required by all processes;
2. The stroke of the press should meet the required size of the product in terms of height, and ensure that the product can be taken off the die after stamping.
3. The closing height of the press (see the remarks), the size of the working table and the size of the slider should meet the correct installation of the mold;
4. The number of strokes per minute of the slider should meet the speed requirements of productivity and material deformation;
5. In general, the motor power is not considered, but if the pressure is sufficient and the power is overloaded during special stamping, the power of the motor should be greater than the power required for stamping.
This is my contact information. If you have any other questions or do not receive the quotation in time, you can contact me