Price of exporting J58K series electric screw press to Russia

Electric screw presses are equipment used in the forging industry, which can be used not only for hot forging, but also for fine forging and finishing.

A screw press, like a forging hammer, is a machine with limited energy. It takes rotational energy from the flywheel and converts it into linear motion of the plunger.

Why use forging to produce hooks?
Lifting hooks can be used for a variety of lifting, rigging, towing, pulling, and securing.
In the lifting and rigging industry, hooks are always used to transport components from one place to another. Therefore, the hook must be strong and able to withstand high weights.

J58K Series Electric Screw Press/suitable for all kinds of precision forging, sizing, precision pressing, calibration and leveling, etc processes. The hitting energy can be accurately set, the stroke is short, and the energy is stable.

The electric screw press is a new type of forging equipment evolved by optimizing the transmission system on the basis of the principle of the friction press.

Electric screw press is a type of press machine in which the ram is driven up and down by a screw,which have the advantages of small volume,short of transmission chain,easy operation.

The electric screw press adopts gear transmission mode. The characteristics of this transmission mode are: special motor, high speed and low torque, different tonnage presses are equipped with special motors of different powers, easy to replace motor faults, simple maintenance, and good motor performance. Guide bush wear is not affected. After years of continuous improvement and innovation, the efficiency of electric screw presses has been greatly improved

J58K series electric screw press / suitable for all kinds of precision forging, sizing, precision pressing, leveling and other processes.

J58K series electric screw press has strong technological adaptability, remarkable energy saving and environmental protection, and high degree of automation. It is not only suitable for hot forging, but also suitable for precision forging and finishing; at the same time, it is suitable for the welding process of stainless steel double bottom pot, and the precision forging of titanium alloy blades or other blades.

J58K series electric screw press is an extremely suitable forging equipment specially developed and designed by Anyang Forging Press for the characteristics of precision forging and tableware manufacturing industry.

Electric screw press is a forging equipment used for hot forging, precision forging and finishing. Electric screw presses are often used in the pressure welding process of stainless steel double bottom pots, and the precision forging of titanium alloy blades and other blades.

The Screw Press is a kind of die forging equipment and belongs to hot die forging equipment. It has a wide range of applications and has the advantages of low noise, and it can form a modern forging production line.

The electric screw press has the advantages of simple structure, easy adjustment and maintenance, no bottom dead center of the slider, convenient mold design, and high precision of forgings.

Electric screw press is a kind of energy-saving precision forging machine. It has the characteristics of simple structure, long service life and high precision standard of formed products. It is suitable for near-die forging, precision pressing, adjustment, bending and imprinting of medium and small workpieces.

Electric screw press is a forging equipment used for hot forging, precision forging and finishing. Electric screw presses are often used in the pressure welding process of stainless steel double bottom pots, and the precision forging of blades such as titanium alloy blades.

The sliding stroke of the electric screw press adopts the positioning form of long slider and long guide rail to achieve high precision and strong anti-overload and unbalanced load capacity.

Electric screw press is a kind of forging equipment used for hot forging, precision forging and finishing. It has the characteristics of accurate control energy, high forming precision of forgings, and high number of strokes.

Electric screw press is a kind of forging equipment with strong technological applicability, taking into account the dual properties of forging hammer and press, and has the characteristics of simple structure, small size, short transmission chain, convenient operation, safe operation and small maintenance workload. It is suitable for various processes such as precision forging, finishing, precision pressing, embossing, calibration, and leveling.

Like a forging hammer, an electric screw press takes rotational energy from the flywheel and converts it into linear motion of the plunger. It can be used to forge a variety of metals and alloys, including steel, titanium, aluminum, and brass, as well as many other specialty materials, such as those used in the aerospace and medical industries.

Anyang Forging Press is a new generation of intelligent electric screw press with more intelligent control system, better stiffness and strength, and better forging accuracy.

Electric screw presses are turned to be designed for the production of various types of metal products, presses are also known as power screw presses, forging presses, cold presses, punches and punches。