Advanced intelligent control system-Electric Screw Press

Electric screw press is not only a forging equipment with strong process applicability, but also an environmentally friendly and energy-saving precision forming equipment

J58K series electric screw press / suitable for all kinds of precision forging, sizing, precision pressing, leveling and other processes.

J58K series electric screw press has strong technological adaptability, remarkable energy saving and environmental protection, and high degree of automation. It is not only suitable for hot forging, but also suitable for precision forging and finishing; at the same time, it is suitable for the welding process of stainless steel double bottom pot, and the precision forging of titanium alloy blades or other blades.

Electric screw press is a kind of forging equipment with strong technological applicability, taking into account the dual properties of forging hammer and press, and has the characteristics of simple structure, small volume, short transmission chain, convenient operation, safe operation and small maintenance workload.

The Screw Press belongs to closed die forging equipment. Die forgings are widely used in automobiles, railway vehicles, construction machinery, national defense, aviation, and other fields.
In the development stage of the screw Press, there are four main transmission forms: Friction Screw Press, Hydraulic Screw Press, Clutch Screw Press, and Electric Screw Press.

Electric screw presses are equipment used in the forging industry, which can be used not only for hot forging, but also for fine forging and finishing.

The J58K series CNC Electric Screw Press is suitable for all kinds of precision forging, finishing, precision pressing, imprinting, alignment, and alignment procedures.

The electric screw press is a new type of forging equipment evolved by optimizing the transmission system on the basis of the principle of the friction press.

Electric screw press is a forging equipment tailored for the forging industry of forging steel, non-ferrous metal forging, and titanium alloy forging according to the characteristics of the forging industry.

Electric screw presses are turned to be designed for the production of various types of metal products, presses are also known as power screw presses, forging presses, cold presses, punches and punches。

J58K Series Electric Screw Press/suitable for all kinds of precision forging, sizing, precision pressing, calibration and leveling, etc processes. The hitting energy can be accurately set, the stroke is short, and the energy is stable.

Electric screw press is widely used for forging parts in the field of machine, automobile, hardware, coal machinery and aerospace, it can be used for die forging, precision forging, trimming, calibration processes, it is one kind of popular forging equipment.

The electric screw press adopts the gear transmission mode, which is characterized by the use of a special motor with high speed and small torque. The presses of different tonnages use special motors of different powers, which are easy to replace when the motor fails. The maintenance is convenient and simple, and the performance of the motor will not be affected by the wear of the screw guide sleeve.

The electric screw press adopts gear transmission mode. The characteristics of this transmission mode are: special motor, high speed and low torque, different tonnage presses are equipped with special motors of different powers, easy to replace motor faults, simple maintenance, and good motor performance. Guide bush wear is not affected. After years of continuous improvement and innovation, the efficiency of electric screw presses has been greatly improved

1. According to the forging method: warm forging, hot forging, cold forging of thin forgings, powder metallurgy forging, straightening processing, combined casting, and forging.
2. According to forging material: all steel including stainless steel, aluminum alloy, titanium, magnesium, brass, copper, etc.

The Screw Press is a kind of die forging equipment and belongs to hot die forging equipment. It has a wide range of applications and has the advantages of low noise, and it can form a modern forging production line.

The electric screw press is only lost in the blow molding process, not consumed in feeding, picking bricks, and cleaning the mold. Anyone can do it in such a short time with one key operation. Fully automatic digital simulation of human strike process

The electric screw press has good rigidity, high sliding guide precision and strong anti-eccentric load capability. It can be used for multi-station die forging. It is a new type of energy-saving and environmentally friendly press.

Electric screw press / suitable for all kinds of precision forging, sizing, precision pressing, leveling and other processes. The hitting energy can be precisely set, the stroke is short, and the energy is stable.

Electric screw press is a kind of forging equipment used for hot forging, precision forging and finishing. It has the characteristics of accurate control energy, high forming precision of forgings, and high number of strokes.

Electric screw press is widely used for forging parts in the field of machine, automobile, hardware, coal machinery and aerospace, it can be used for die forging, precision forging, trimming, calibration processes, it is one kind of popular forging equipment.