C41-750kg Anyang pneumatic forging hammers for sale to Indonesia

Pneumatic Forging Hammer belongs to Open Die Forging Equipment, which relies on compressed air as a medium to do work and pushes the hammer head to move up and down to achieve the purpose of hammering the workpiece.

Forging hammers, power hammers or pile drivers are used by many blacksmith workshops to make various forged trim pieces, simplifying the job of forming hot steel.

C41 series Pneumatic Forging Hammer is a kind of free forging equipment, which is flexible in operation and widely used in the production of small and medium-sized forgings.

Pneumatic forging hammer is a free forging hammer. With a self-contained power hammer, you don’t need an external air supply or high pressure hose.

Anyang forging hammer is a free forging hammer. Using a self-contained power hammer eliminates the need for an external air supply or high pressure hose. It can be used for various free forgings, such as drawing, upsetting, stamping, hot shearing, forging welding, bending and torsion. It can be used for die forging with pressurized die, but cannot be used for closed die forging, because the impact energy of closed die forging is very large, and the main components such as hammer rod, guide rail, working cylinder, etc. will be damaged.

​The internal parts of Anyang pneumatic forging hammer are forged steel and precision machined. There are no internal rubber air hoses to deteriorate over time. The drive belts are external to the machine for easy adjustment and away from harmful oil.

Anyang pneumatic forging hammers are self-contained pneumatic power hammers. The design is based on the time-proved designs of the old European hammers many of which are still in use today. With a self-contained power hammer, you require no external air supply or high-pressure hoses.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

Advantages of Pneumatic Forging Hammer（Air Forging Hammer, Power Forging Hammer）:
Simple structure and convenient operation!
Low cost and easy maintenance!
High production efficiency and strong process adaptability!
Production of small and medium forgings

The C41 series pneumatic hammer is widely used for open die forging works, including drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it can also be used for open-type close forging.

C41 series air hammers are suitable for all kinds of free forging, such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc. All kinds of open die forging can be performed by using the tire membrane.

As a pre-forging device, Anyang pneumatic free forging hammer can replace steam hammer or other belt drop hammer. The most important point is that the investment is small and the return is high.

Both forging hammers / forging presses for art blacksmithing and for industrial open die forging and drop forgings/ closed die forgings.