Anyang Forging Pneumatic Forging Hammer / Power Forging Hammer (C41)

C41 series pneumatic open die forging hammer includes 150 kg, 250 kg, 400 kg, 560 kg, 750 kg, 1000 kg, and 2000 kg. For the 2000 kg pneumatic open die forging hammer, which can be used for forging steel balls and other pre-forging works.

Our pneumatic forging hammers are used in many industrial applications. Strict verification of many parameters before delivery.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

People call blacksmithing one of the hardest techniques. However, each product of this purely manual exercise is made through thousands of trials. The product has high density and is very durable. Sometimes the surface is smooth like a mirror. The industry of iron fighting is withdrawing from the stage of history, and blacksmiths have also been replaced by machines. The air hammer is one of such machines. It expresses the spirit of iron fighting and can stand the test of hard work.

Anyang pneumatic forging hammer from 150kg to 2000kg is widely used in industrial open die forging.C41 series pneumatic hammer is widely used for general open die forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending, and twisting.

This is a 560kg Pneumatic Forging Hammer made by Anyang Forging Press Company. We have produced many of these large Pneumatic Forging Hammers for Indian customers.

Anyang Forging C41 Blacksmith Energy Hammer Air Hammer Air hammer is a kind of free forging equipment. It has two cylinders. The compression cylinder compresses the air and sends it into the working cylinder through the distribution valve. Flexible operation, this model is suitable for all kinds of free forging

C41 series pneumatic hammers are widely used in general free forgings, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc. It is also used for open and closed forging with pillow die.

Air hammer forged steel balls are produced by air hammer forging, first forging and then quenching.

As a pre-forging device, Anyang pneumatic free forging hammer can replace steam hammer or other belt drop hammer. The most important point is that the investment is small and the return is high.

Forging hammers, power hammers or pile drivers are used by many blacksmith workshops to make various forged trim pieces, simplifying the job of forming hot steel.

Pneumatic Forging Hammer is suitable for all kinds of free forging: such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc., all kinds of open die forging can be performed by using a pad die.

Power hammers are mechanically driven forging tools that use hydraulic oil to lift the hammer and strike, helping the blacksmith to complete more advanced blacksmithing projects faster.

Both forging hammers / forging presses for art blacksmithing and for industrial open die forging and drop forgings/ closed die forgings.