Martillo de forja neumático

C41 series Anyang power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.

C41 series pneumatic hammers are widely used in general free forgings, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc. It is also used for open and closed forging with pillow die.

Power Forging Hammer is a kind of forging equipment, which has the functions of shearing, punching, forging, and so on.

Power hammers are mechanical forging hammers that use a non-muscular power source to raise the hammer preparatory to striking, and accelerate it onto the work being hammered. Also called “Open Die Power Forging Hammers.”

The C41 series pneumatic hammer is widely used for open die forging works, including drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it can also be used for open-type close forging.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

C41 series pneumatic forging hammer is a free forging hammer, which can carry out forging work such as elongation, roughing, punching, hot shearing, bending, torsion, forging and welding, and can also be used for forming forging with special-shaped anvils.

C41 series pneumatic open die forging hammer includes 150 kg, 250 kg, 400 kg, 560 kg, 750 kg, 1000 kg, and 2000 kg. For the 2000 kg pneumatic open die forging hammer, which can be used for forging steel balls and other pre-forging works.

Blacksmith pneumatic power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.

Power Forging Hammer (Pneumatic Forging Hammers) from 150kg to 2000kg is widely used in industrial open die forging. The C41 series pneumatic hammer is widely used for drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it is also used for open-type close forging.

This is a 560kg Pneumatic Forging Hammer made by Anyang Forging Press Company. We have produced many of these large Pneumatic Forging Hammers for Indian customers.

The Blacksmith Power Hammer is a type of free-forging machine. The compression cylinder compresses the air, sends it into the working cylinder through the distribution valve, and pushes the piston together with the hammer to move up and down to play the hammering effect. Flexible operation, widely used in the production of small and medium forgings.

Both forging hammers / forging presses for art blacksmithing and for industrial open die forging and drop forgings/ closed die forgings.

Power hammers are mechanically driven forging tools that use hydraulic oil to lift the hammer and strike, helping the blacksmith to complete more advanced blacksmithing projects faster.

Advantages of Pneumatic Forging Hammer（Air Forging Hammer, Power Forging Hammer）:
Simple structure and convenient operation!
Low cost and easy maintenance!
High production efficiency and strong process adaptability!
Production of small and medium forgings

Anyang Blacksmith Power Hammer (9kg to 110kg) is an independent pneumatic power hammer. The design is based on the time-proven design of old European hammers, many of which are still in use today.

Pneumatic forging hammers are widely used in industrial free forging from 150kg to 2000kg. C41 series pneumatic hammers are widely used in general free forging work, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc.

As a pre-forging device, Anyang pneumatic free forging hammer can replace steam hammer or other belt drop hammer. The most important point is that the investment is small and the return is high.

The split-type large air hammer is composed of main components such as body, compression piston, transmission, hammer rod lead, hammer rod, anvil and control. Reasonable structure, flexible operation, stable performance and beautiful appearance.