(C41) Power Forging Hammer Manufacturer in China

Our pneumatic forging hammers are used in many industrial applications. Strict verification of many parameters before delivery.

Power hammers are mechanical forging hammers that use a non-muscular power source to raise the hammer preparatory to striking, and accelerate it onto the work being hammered. Also called “Open Die Power Forging Hammers.”

Pneumatic forging hammers are widely used in industrial free forging from 150kg to 2000kg. C41 series pneumatic hammers are widely used in general free forging work, such as drawing, upsetting, punching, chiseling, forging welding, bending, twisting, etc.

Power Forging Hammer is a kind of forging equipment, which has the functions of shearing, punching, forging, and so on.

Pneumatic Forging Hammer is suitable for all kinds of free forging: such as stretching, upsetting, punching, shearing, forging welding, torsion, bending, etc., all kinds of open die forging can be performed by using a pad die.

Air hammer forged steel balls are produced by air hammer forging, first forging and then quenching.

C41 series pneumatic forging hammer is a free forging hammer, which can carry out forging work such as elongation, roughing, punching, hot shearing, bending, torsion, forging and welding, and can also be used for forming forging with special-shaped anvils.

Pneumatic hammer forging machine is a free forging equipment, the whole machine is suitable for small manufacturing and repair industries.

Anyang Blacksmith Power Hammer (9kg to 110kg) is an independent pneumatic power hammer. The design is based on the time-proven design of old European hammers, many of which are still in use today.

Anyang Forging C41 Blacksmith Energy Hammer Air Hammer Air hammer is a kind of free forging equipment. It has two cylinders. The compression cylinder compresses the air and sends it into the working cylinder through the distribution valve. Flexible operation, this model is suitable for all kinds of free forging

Advantages of Pneumatic Forging Hammer（Air Forging Hammer, Power Forging Hammer）:
Simple structure and convenient operation!
Low cost and easy maintenance!
High production efficiency and strong process adaptability!
Production of small and medium forgings

The C41 series pneumatic hammer is widely used for open die forging works, including drawing out, upsetting, punching, chiseling, forging welding, bending, and twisting. With bolster dies, it can also be used for open-type close forging.

The air hammer drilling method refers to applying pressure to the drilling tool and rotating at the same time with the air hammer connected to the drill bit,
Apply high-frequency impact energy to the bit to carry out percussive rotary drilling at the bottom of the hole. This method is more efficient than general rotary drilling
High, less accidents in the hole and low engineering cost.

Pneumatic Forging Hammer belongs to Open Die Forging Equipment, which relies on compressed air as a medium to do work and pushes the hammer head to move up and down to achieve the purpose of hammering the workpiece.

People call blacksmithing one of the hardest techniques. However, each product of this purely manual exercise is made through thousands of trials. The product has high density and is very durable. Sometimes the surface is smooth like a mirror. The industry of iron fighting is withdrawing from the stage of history, and blacksmiths have also been replaced by machines. The air hammer is one of such machines. It expresses the spirit of iron fighting and can stand the test of hard work.

C41 series Anyang power forging hammers are mainly used for forging, deep drawing, upsetting, punching, hot shearing, forging welding, bending, torsion and wedge forging.

Anyang pneumatic forging hammer from 150kg to 2000kg is widely used in industrial open die forging.C41 series pneumatic hammer is widely used for general open die forging works, such as drawing-out, upsetting, punching, chiseling, forging welding, bending, and twisting.